Preventative Maintenance

Drain freshwater system, isolate and drain water heater, remove anode rod, fill lines and p-traps with antifreeze (2 gallons included in price). Additional antifreeze may be needed for ice maker and/or washer.

Remove antifreeze from lines, flush water lines including water pump, put water heater back in operation, put water system back into normal operating mode. (Customer to provide adequate water from city connection or freshwater tank). (Customer to drain tanks following procedure).

Inspect, clean, and verify operation of Fire/Smoke detector, CO detector, Fire Extinguishers, and Emergency Escape Windows. Record replacement dates.

Recommended annually: Inspect anode rod. Sanitize tank with vinegar solution. Leave overnight and then flush the tank. (Customer to provide adequate water from city connection or fresh water tank).

Recommended annually: Inspect anode rod, verify electric element, check relief valve, check electric ignitor gap and condition, clean LP orifice, clean burn chamber, verify LP and Electric Operation. (Customer to provide adequate water from city connection or fresh water tank).

Verify Overall battery operation including load testing, check water levels and refill if necessary, clean terminals, Verify converter operation.

Tighten all breakers and connections, Inspect wiring, verify fuse integrity, check all outlets including GFCI operation. (Customer to provide adequate shore power or generator power to perform this service.)

Recommended annually: Clean blower wheel, inspect gaskets, inspect burn chamber, clean tubes, inspect electrode including gap, check orifice, inspect wires, inspect burner head. This maintenance item requires the removal of the furnace from the RV.

Recommended annually: Clean surrounding compartment, clean burn chamber, inspect electrode including gap, clean burn tube/orifice, inspect wiring, inspect door seals, verify LP and Electric operation including flame characteristics, evaluate air flow ventilation. (Customer to provide LP and Electrcial power.)

Clean evaporator and condenser fins, Inspect wiring, clean drip tray, lube fan bearing shaft, clean inside filters, inspect gasket, verify compressor and capacitors, conduct operational temperature test. (Customer to provide adequate shore power or generator power to perform this service.)

Recommended annually: Inspect tanks, regulator, lines , and connections. Conduct Operational tests (leak, pressure, and load). Verify LP detectors. (Customer to provide filled LP tanks.)

Recommended annually: Drain system, fill with chlorine bleach solution, let sit overnight, drain and flush system. (Customer to provide adequate water from city connection or fresh water tank.)

Inspect roof for tears, rips, damage. Check condition of caulk and repair small issues, check conditions of vents, skylights, etc. If removal and/or significant caulk repairs are need, a separate repair activity will need to be conducted.

Check horizontal and side-to-side alignment. Lubricate operating mechanisms. Clean and treat seals. Check for sealant and water issues. Verify proper retraction and extension. (Customer to provide adequate shore power or generator power to perform this service.)